Audi A3 30 TDI (2.0) 116 hp — Stage 1 file (+69 hp)
hp
Stage 1 file for Audi A3 30 TDI (2.0) 116 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A3 30 TDI (2.0) 116 hp ECU
Audi A3 (2019 - 8Y) 30 TDI (2.0) 116 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 116 to 185 hp (+69 hp, +59%) and torque from 250 to 400 Nm (+150 Nm). ECU — Bosch EDC17C74. Flashing method: OBD or Bench depending on the unit's protection. A modern diesel built in 2019 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
Audi shares platforms with Volkswagen, Porsche, Bentley and Lamborghini within VAG. Audi's signature slogan is “Vorsprung durch Technik” (Progress through Technology). Audi is a premium manufacturer from Ingolstadt (Bavaria), founded in 1909 as Audiwerke August Horch & Cie. The MQB platform lets a single calibration cover Audi/VW/Skoda/Seat. DPF/SCR with AdBlue is standard on all Euro-6 Audi diesels. TDI is Audi's signature designation for direct-injection turbo diesels, in production since 1989.
Within the VAG group, ECUs are standardised, so a single file often fits a dozen models across Audi/VW/Skoda/Seat. On Audi, Stage 1 usually fits within the standard turnaround time. The Audi community is renowned for its active tuning scene and a huge library of available Stage files. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe.
Frequently asked questions
What power gain do you get after chip tuning the Audi A3 30 TDI (2.0) 116 hp?
After Stage 1 the power of the Audi A3 30 TDI (2.0) 116 hp rises from 116 to 185 hp, a gain of 69 hp (+59%). Torque rises from 250 to 400 Nm (+150 Nm).
How does Stage 1 differ from stock on the Audi A3?
Stage 1 is a software optimization of the factory ECU firmware of the Audi A3 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +69 hp with no hardware changes.
What is the risk of Stage 1 on the Audi A3 30 TDI (2.0) 116 hp?
A remap of the Audi A3 30 TDI (2.0) 116 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Audi A3 30 TDI (2.0) 116 hp?
Stage 2 on the Audi A3 30 TDI (2.0) 116 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Audi A3 30 TDI (2.0) 116 hp use?
The Audi A3 30 TDI (2.0) 116 hp is fitted with the Bosch EDC17C74 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Audi A3 remain valid after Stage 1?
After remapping the Audi A3, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi A3?
Reading and writing via OBD takes 25-30 minutes on the Audi A3. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi A3?
Before Stage 1 the original of the Audi A3 30 TDI (2.0) 116 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi A3 30 TDI (2.0) 116 hp cost?
The remap price for the Audi A3 30 TDI (2.0) 116 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.