Audi A3 2.0 TFSI 310 hp — Stage 1 file (+40 hp)
hp
Stage 1 file for Audi A3 2.0 TFSI 310 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A3 2.0 TFSI 310 hp ECU
Audi A3 (2016 - 8V-FL) 2.0 TFSI 310 hp — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 310 to 350 hp (+40 hp, +13%) and torque from 400 to 480 Nm (+80 Nm). This engine ships with different ECU variants: Siemens/Continental Simos18.1, Siemens/Continental Simos18.2, Siemens/Continental Simos18.3, Siemens/Continental Simos18.6. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ250 (MQB), Bosch DQ38x — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 6 configurations · 6 ECU variants. A petrol engine built in 2016 — a Tricore platform without strong protection; OBD access works.
Audi Sport is Audi's performance division, building the RS models. Audi shares platforms with Volkswagen, Porsche, Bentley and Lamborghini within VAG. Audi's signature slogan is “Vorsprung durch Technik” (Progress through Technology). Audi S models are performance variants with turbo engines, a milder step than RS. Audi shares its ECUs and calibration algorithms with Volkswagen. The factory calibration of Audi petrol engines is conservative, leaving headroom for Stage 1.
On Audi, Stage 1 usually fits within the standard turnaround time. Audi S models sit between the standard cars and the RS range. On pre-2017 Audi models, Stage 1 is flashed via OBD without bench. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1.
Tiptronic is Audi's classic automatic for longitudinally mounted engines. S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range). S tronic comes in dry and wet-clutch versions, each with a different torque rating.
Frequently asked questions
What is the Stage 1 effect on the Audi A3 2.0 TFSI 310 hp?
Stage 1 chip tuning on the Audi A3 2.0 TFSI 310 hp boosts engine output by 40 hp: from 310 to 350 hp. Torque rises from 400 to 480 Nm (+80 Nm).
What changes in the Audi A3 ECU after Stage 1?
Stage 1 chip tuning of the Audi A3 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +40 hp with no hardware changes.
Is Stage 1 safe on the high-output Audi A3 2.0 TFSI 310 hp?
Stage 1 on the powerful Audi A3 2.0 TFSI 310 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How much does Stage 2 add on the Audi A3?
Stage 2 for the Audi A3 2.0 TFSI 310 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Audi A3 2.0 TFSI 310 hp?
The Audi A3 2.0 TFSI 310 hp was fitted with different ECUs depending on the year and trim: Siemens/Continental Simos18.1, Siemens/Continental Simos18.2, Siemens/Continental Simos18.3, Siemens/Continental Simos18.6. The write method (OBD, Bench, Boot) is determined when the unit is read.
How many TCU units does the Audi A3 2.0 TFSI 310 hp have?
The Audi A3 2.0 TFSI 310 hp comes with 2 different automatic-transmission TCU units: Temic DQ250 (MQB), Bosch DQ38x. Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.
What happens to the Audi A3 warranty after chip tuning?
The factory warranty of the Audi A3 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Audi A3 take?
On the Audi A3 2.0 TFSI 310 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Audi A3?
Yes, the original ECU firmware of the Audi A3 2.0 TFSI 310 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Audi A3?
Stage 1 for the Audi A3 2.0 TFSI 310 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.