Audi A3 2.0 TDI CR EU6 150 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Audi A3 2.0 TDI CR EU6 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A3 2.0 TDI CR EU6 150 hp ECU
Audi A3 (2016 - 8V-FL) 2.0 TDI CR EU6 150 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 150 to 185 hp (+35 hp, +23%) and torque from 320 to 420 Nm (+100 Nm). This engine ships with different ECU variants: Bosch EDC17C46, Bosch EDC17C64, Bosch EDC17C74, Bosch MD1CS004. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DL382, Temic DQ250 (MQB), Bosch DQ38x, Bosch DQ500 (MQB) — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 16 configurations · 8 ECU variants. The 2016 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Audi shares platforms with Volkswagen, Porsche, Bentley and Lamborghini within VAG. Audi's signature slogan is “Vorsprung durch Technik” (Progress through Technology). Audi is a premium manufacturer from Ingolstadt (Bavaria), founded in 1909 as Audiwerke August Horch & Cie. The MQB platform lets a single calibration cover Audi/VW/Skoda/Seat. DPF/SCR with AdBlue is standard on all Euro-6 Audi diesels. TDI is Audi's signature designation for direct-injection turbo diesels, in production since 1989.
On pre-2017 Audi models, Stage 1 is flashed via OBD without bench. On mid-range Audi diesels, Stage 1 delivers a noticeable torque gain. The Audi community is renowned for its active tuning scene and a huge library of available Stage files. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe.
S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range). S tronic comes in dry and wet-clutch versions, each with a different torque rating. The S tronic TCU requires calibration at Stage 1+, as the torque limiter usually sits below the engine's potential.
Frequently asked questions
What power gain do you get after chip tuning the Audi A3 2.0 TDI CR EU6 150 hp?
After Stage 1 the power of the Audi A3 2.0 TDI CR EU6 150 hp rises from 150 to 185 hp, a gain of 35 hp (+23%). Torque rises from 320 to 420 Nm (+100 Nm).
How does Stage 1 differ from stock on the Audi A3?
Stage 1 on the Audi A3 2.0 TDI CR EU6 150 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +35 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 TDI CR EU6 150 hp?
Stage 1 on the Audi A3 2.0 TDI CR EU6 150 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Audi A3 2.0 TDI CR EU6 150 hp?
Stage 2 on the Audi A3 2.0 TDI CR EU6 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Audi A3 2.0 TDI CR EU6 150 hp have?
The Audi A3 2.0 TDI CR EU6 150 hp has 4 ECU variants: Bosch EDC17C46, Bosch EDC17C64, Bosch EDC17C74, Bosch MD1CS004. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Which TCUs are found on the Audi A3 2.0 TDI CR EU6 150 hp?
The Audi A3 2.0 TDI CR EU6 150 hp was fitted with different automatic-transmission units: Temic DL382, Temic DQ250 (MQB), Bosch DQ38x, Bosch DQ500 (MQB). All are supported via Bench reading; the Stage 1 calibration is done for the specific TCU after the revision is identified.
Does Stage 1 void the warranty on the Audi A3?
Stage 1 on the Audi A3 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Audi A3 2.0 TDI CR EU6 150 hp done?
The full remap cycle for the Audi A3 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Audi A3?
The original Audi A3 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Audi A3 2.0 TDI CR EU6 150 hp?
The cost of Stage 1 for the Audi A3 2.0 TDI CR EU6 150 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.