Audi A3 1.6 TDI EU6 115 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Audi A3 1.6 TDI EU6 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A3 1.6 TDI EU6 115 hp ECU
Audi A3 (2016 - 8V-FL) 1.6 TDI EU6 115 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 115 to 145 hp (+30 hp, +26%) and torque from 250 to 310 Nm (+60 Nm). ECU — Delphi DCM6.2V. Flashing method: OBD or Bench depending on the unit's protection. The Temic DQ200 (MQB) TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2016 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Audi is a premium manufacturer from Ingolstadt (Bavaria), founded in 1909 as Audiwerke August Horch & Cie. Audi's petrol range is badged TFSI, and the diesel range TDI. quattro is Audi's signature all-wheel-drive system, introduced in 1980. TDI is Audi's signature designation for direct-injection turbo diesels, in production since 1989. Audi S models with a diesel engine use an electrically driven compressor to eliminate turbo lag. The factory calibration of Audi diesels is conservative, leaving headroom for Stage 1.
On pre-2017 Audi models, Stage 1 is flashed via OBD without bench. On mid-range Audi diesels, Stage 1 delivers a noticeable torque gain. The Audi community is renowned for its active tuning scene and a huge library of available Stage files. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe.
S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range). S tronic comes in dry and wet-clutch versions, each with a different torque rating. The S tronic TCU requires calibration at Stage 1+, as the torque limiter usually sits below the engine's potential.
Frequently asked questions
How much horsepower does Stage 1 add for the Audi A3 1.6 TDI EU6 115 hp?
After Stage 1 the power of the Audi A3 1.6 TDI EU6 115 hp rises from 115 to 145 hp, a gain of 30 hp (+26%). Torque rises from 250 to 310 Nm (+60 Nm).
How does Stage 1 differ from stock on the Audi A3?
Stage 1 on the Audi A3 1.6 TDI EU6 115 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 TDI EU6 115 hp?
Stage 1 on the Audi A3 1.6 TDI EU6 115 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Audi A3 1.6 TDI EU6 115 hp?
Stage 2 on the Audi A3 1.6 TDI EU6 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Audi A3 1.6 TDI EU6 115 hp run?
The control unit of the Audi A3 1.6 TDI EU6 115 hp is the Delphi DCM6.2V. Before flashing, the engineer identifies the exact revision and selects the write method.
Does the Temic DQ200 (MQB) transmission need calibration after Stage 1 on the Audi A3?
Remapping the Temic DQ200 (MQB) gearbox is essential to fully unlock Stage 1 on the Audi A3 1.6 TDI EU6 115 hp. Without a TCU update the factory torque cap will choke the torque gain and shifts will become noticeably softer.
Does Stage 1 void the warranty on the Audi A3?
Stage 1 on the Audi A3 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Audi A3 1.6 TDI EU6 115 hp done?
The full remap cycle for the Audi A3 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Audi A3?
The original Audi A3 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Audi A3 1.6 TDI EU6 115 hp?
The cost of Stage 1 for the Audi A3 1.6 TDI EU6 115 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.