Audi A3 1.6 TDI EU5 110 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Audi A3 1.6 TDI EU5 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A3 1.6 TDI EU5 110 hp ECU
Audi A3 (2012 - 8V) 1.6 TDI EU5 110 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 110 to 145 hp (+35 hp, +32%) and torque from 250 to 310 Nm (+60 Nm). This engine ships with different ECU variants: Bosch EDC17C64, Bosch EDC17C74. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2012 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Audi is a premium manufacturer from Ingolstadt (Bavaria), founded in 1909 as Audiwerke August Horch & Cie. Audi's petrol range is badged TFSI, and the diesel range TDI. quattro is Audi's signature all-wheel-drive system, introduced in 1980. TDI is Audi's signature designation for direct-injection turbo diesels, in production since 1989. Audi S models with a diesel engine use an electrically driven compressor to eliminate turbo lag. The factory calibration of Audi diesels is conservative, leaving headroom for Stage 1.
APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. On Audi, Stage 1 usually fits within the standard turnaround time. On pre-2017 Audi models, Stage 1 is flashed via OBD without bench. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe.
Frequently asked questions
How much horsepower does Stage 1 add for the Audi A3 1.6 TDI EU5 110 hp?
After Stage 1 the power of the Audi A3 1.6 TDI EU5 110 hp rises from 110 to 145 hp, a gain of 35 hp (+32%). Torque rises from 250 to 310 Nm (+60 Nm).
How does Stage 1 differ from stock on the Audi A3?
Stage 1 is a software optimization of the factory ECU firmware of the Audi A3 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Audi A3 1.6 TDI EU5 110 hp?
A remap of the Audi A3 1.6 TDI EU5 110 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Audi A3 1.6 TDI EU5 110 hp?
Stage 2 on the Audi A3 1.6 TDI EU5 110 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Audi A3 1.6 TDI EU5 110 hp built with?
The Audi A3 1.6 TDI EU5 110 hp comes with 2 ECU variants: Bosch EDC17C64, Bosch EDC17C74. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Audi A3 remain valid after Stage 1?
After remapping the Audi A3, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi A3?
Reading and writing via OBD takes 25-30 minutes on the Audi A3. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi A3?
Before Stage 1 the original of the Audi A3 1.6 TDI EU5 110 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi A3 1.6 TDI EU5 110 hp cost?
The remap price for the Audi A3 1.6 TDI EU5 110 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.