Audi A3 1.4 TSI/TFSI S&S 150 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Audi A3 1.4 TSI/TFSI S&S 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A3 1.4 TSI/TFSI S&S 150 hp ECU
Audi A3 (2012 - 8V) 1.4 TSI/TFSI S&S 150 hp — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 150 to 180 hp (+30 hp, +20%) and torque from 250 to 300 Nm (+50 Nm). This engine ships with different ECU variants: Bosch MED17.1.21, Bosch MED17.1.61, Bosch MED17.5.21, Bosch MED17.5.25. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 12 configurations · 6 ECU variants. The 2012 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
quattro is Audi's signature all-wheel-drive system, introduced in 1980. The four rings in the Audi logo are a legacy of the 1932 Auto Union merger of Audi, Horch, DKW and Wanderer. The Audi community is one of the most active in Europe for chip tuning. The factory calibration of Audi petrol engines is conservative, leaving headroom for Stage 1.
The Audi community is renowned for its active tuning scene and a huge library of available Stage files. Within the VAG group, ECUs are standardised, so a single file often fits a dozen models across Audi/VW/Skoda/Seat. APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files.
The S tronic TCU requires calibration at Stage 1+, as the torque limiter usually sits below the engine's potential. Tiptronic is Audi's classic automatic for longitudinally mounted engines. S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range).
Frequently asked questions
What is the Stage 1 effect on the Audi A3 1.4 TSI/TFSI S&S 150 hp?
The Stage 1 gain for the Audi A3 1.4 TSI/TFSI S&S 150 hp is 30 hp (+20%) over the stock 150 hp, for a total of 180 hp. Torque rises from 250 to 300 Nm (+50 Nm).
What is Stage 1 chip tuning for the Audi A3?
Stage 1 chip tuning of the Audi A3 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +30 hp with no hardware changes.
Can you do Stage 1 on the Audi A3 1.4 TSI/TFSI S&S 150 hp?
Yes, Stage 1 for the Audi A3 1.4 TSI/TFSI S&S 150 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Audi A3?
Stage 2 on the Audi A3 1.4 TSI/TFSI S&S 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Audi A3 1.4 TSI/TFSI S&S 150 hp?
The Audi A3 1.4 TSI/TFSI S&S 150 hp was fitted with different ECUs depending on the year and trim: Bosch MED17.1.21, Bosch MED17.1.61, Bosch MED17.5.21, Bosch MED17.5.25. The write method (OBD, Bench, Boot) is determined when the unit is read.
How many TCU units does the Audi A3 1.4 TSI/TFSI S&S 150 hp have?
The Audi A3 1.4 TSI/TFSI S&S 150 hp comes with 2 different automatic-transmission TCU units: Temic DQ200 (MQB), Temic DQ200G2. Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.
What happens to the Audi A3 warranty after chip tuning?
The factory warranty of the Audi A3 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Audi A3 take?
On the Audi A3 1.4 TSI/TFSI S&S 150 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Audi A3?
Yes, the original ECU firmware of the Audi A3 1.4 TSI/TFSI S&S 150 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Audi A3?
Stage 1 for the Audi A3 1.4 TSI/TFSI S&S 150 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.