Audi A3 2.0 TDI CR 136 hp — Stage 1 file (+49 hp)
hp
Stage 1 file for Audi A3 2.0 TDI CR 136 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A3 2.0 TDI CR 136 hp ECU
Audi A3 (2008 - 8P) 2.0 TDI CR 136 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 136 to 185 hp (+49 hp, +36%) and torque from 320 to 410 Nm (+90 Nm). This engine ships with different ECU variants: Bosch EDC17C46, Bosch EDC17C54, Bosch EDC17CP14, Bosch EDC17CP20. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ250E, Temic DQ250F — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 6 configurations · 6 ECU variants. The 2008 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Audi shares platforms with Volkswagen, Porsche, Bentley and Lamborghini within VAG. Audi's signature slogan is “Vorsprung durch Technik” (Progress through Technology). Audi is a premium manufacturer from Ingolstadt (Bavaria), founded in 1909 as Audiwerke August Horch & Cie. The MQB platform lets a single calibration cover Audi/VW/Skoda/Seat. DPF/SCR with AdBlue is standard on all Euro-6 Audi diesels. TDI is Audi's signature designation for direct-injection turbo diesels, in production since 1989.
Within the VAG group, ECUs are standardised, so a single file often fits a dozen models across Audi/VW/Skoda/Seat. On Audi, Stage 1 usually fits within the standard turnaround time. The Audi community is renowned for its active tuning scene and a huge library of available Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files.
The S tronic TCU requires calibration at Stage 1+, as the torque limiter usually sits below the engine's potential. Tiptronic is Audi's classic automatic for longitudinally mounted engines. S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range).
Frequently asked questions
What power gain do you get after chip tuning the Audi A3 2.0 TDI CR 136 hp?
The Stage 1 gain for the Audi A3 2.0 TDI CR 136 hp is 49 hp (+36%) over the stock 136 hp, for a total of 185 hp. Torque rises from 320 to 410 Nm (+90 Nm).
What is Stage 1 chip tuning for the Audi A3?
Stage 1 chip tuning of the Audi A3 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +49 hp with no hardware changes.
Can you do Stage 1 on the Audi A3 2.0 TDI CR 136 hp?
Yes, Stage 1 for the Audi A3 2.0 TDI CR 136 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Audi A3?
Stage 2 on the Audi A3 2.0 TDI CR 136 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Audi A3 2.0 TDI CR 136 hp?
The Audi A3 2.0 TDI CR 136 hp was fitted with different ECUs depending on the year and trim: Bosch EDC17C46, Bosch EDC17C54, Bosch EDC17CP14, Bosch EDC17CP20. The write method (OBD, Bench, Boot) is determined when the unit is read.
How many TCU units does the Audi A3 2.0 TDI CR 136 hp have?
The Audi A3 2.0 TDI CR 136 hp comes with 2 different automatic-transmission TCU units: Temic DQ250E, Temic DQ250F. Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.
What happens to the Audi A3 warranty after chip tuning?
The factory warranty of the Audi A3 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Audi A3 take?
On the Audi A3 2.0 TDI CR 136 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Audi A3?
Yes, the original ECU firmware of the Audi A3 2.0 TDI CR 136 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Audi A3?
Stage 1 for the Audi A3 2.0 TDI CR 136 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.