Audi A1 40 TFSI (2.0) 200 hp — Stage 1 file (+40 hp)
hp
Stage 1 file for Audi A1 40 TFSI (2.0) 200 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A1 40 TFSI (2.0) 200 hp ECU
Audi A1 (2018 - GB) 40 TFSI (2.0) 200 hp — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 200 to 240 hp (+40 hp, +20%) and torque from 320 to 380 Nm (+60 Nm). ECU — Bosch MG1CS001. Flashing method: OBD or Bench depending on the unit's protection. A 2018 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Audi's signature slogan is “Vorsprung durch Technik” (Progress through Technology). Audi is a premium manufacturer from Ingolstadt (Bavaria), founded in 1909 as Audiwerke August Horch & Cie. Audi's petrol range is badged TFSI, and the diesel range TDI. TFSI is Audi's signature designation for direct-injection petrol turbo engines.
On Audi, Stage 1 usually fits within the standard turnaround time. The Audi community is renowned for its active tuning scene and a huge library of available Stage files. APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential.
Frequently asked questions
How many horsepower does the Audi A1 40 TFSI (2.0) 200 hp reach after a remap?
Stage 1 chip tuning on the Audi A1 40 TFSI (2.0) 200 hp boosts engine output by 40 hp: from 200 to 240 hp. Torque rises from 320 to 380 Nm (+60 Nm).
What changes in the Audi A1 ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Audi A1 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +40 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Audi A1?
Stage 1 on the powerful Audi A1 40 TFSI (2.0) 200 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Audi A1 40 TFSI (2.0) 200 hp?
Stage 2 for the Audi A1 40 TFSI (2.0) 200 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Audi A1 40 TFSI (2.0) 200 hp use?
The Audi A1 40 TFSI (2.0) 200 hp is fitted with the Bosch MG1CS001 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Audi A1 remain valid after Stage 1?
After remapping the Audi A1, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi A1?
Reading and writing via OBD takes 25-30 minutes on the Audi A1. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi A1?
Before Stage 1 the original of the Audi A1 40 TFSI (2.0) 200 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi A1 40 TFSI (2.0) 200 hp cost?
The remap price for the Audi A1 40 TFSI (2.0) 200 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.