Audi A1 1.8 TFSI 192 hp — Stage 1 file (+28 hp)
hp
Stage 1 file for Audi A1 1.8 TFSI 192 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A1 1.8 TFSI 192 hp ECU
Audi A1 (2015 - 8X) 1.8 TFSI 192 hp — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 192 to 220 hp (+28 hp, +15%) and torque from 250 to 300 Nm (+50 Nm). This engine ships with different ECU variants: Siemens/Continental Simos18.1, Siemens/Continental Simos18.2, Siemens/Continental Simos18.3, Siemens/Continental Simos18.6. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 4 ECU variants. A petrol engine built in 2015 — a Tricore platform without strong protection; OBD access works.
Audi Sport is Audi's performance division, building the RS models. Audi shares platforms with Volkswagen, Porsche, Bentley and Lamborghini within VAG. Audi's signature slogan is “Vorsprung durch Technik” (Progress through Technology). Mid-range Audi turbo petrol engines are a high-volume Stage 1 subject.
On mid-range standard Audi petrol engines, Stage 1 delivers a noticeable gain. The Audi community is renowned for its active tuning scene and a huge library of available Stage files. Within the VAG group, ECUs are standardised, so a single file often fits a dozen models across Audi/VW/Skoda/Seat. The MQB platform is the most refined chip tuning segment in Europe. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes.
Frequently asked questions
What is the Stage 1 effect on the Audi A1 1.8 TFSI 192 hp?
Stage 1 chip tuning on the Audi A1 1.8 TFSI 192 hp boosts engine output by 28 hp: from 192 to 220 hp. Torque rises from 250 to 300 Nm (+50 Nm).
What changes in the Audi A1 ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Audi A1 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +28 hp with no hardware changes.
What is the risk of Stage 1 on the Audi A1 1.8 TFSI 192 hp?
A remap of the Audi A1 1.8 TFSI 192 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Audi A1 1.8 TFSI 192 hp?
Stage 2 for the Audi A1 1.8 TFSI 192 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Audi A1 1.8 TFSI 192 hp built with?
The Audi A1 1.8 TFSI 192 hp comes with 4 ECU variants: Siemens/Continental Simos18.1, Siemens/Continental Simos18.2, Siemens/Continental Simos18.3, Siemens/Continental Simos18.6. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Audi A1 remain valid after Stage 1?
After remapping the Audi A1, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi A1?
Reading and writing via OBD takes 25-30 minutes on the Audi A1. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi A1?
Before Stage 1 the original of the Audi A1 1.8 TFSI 192 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi A1 1.8 TFSI 192 hp cost?
The remap price for the Audi A1 1.8 TFSI 192 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.