Audi A1 1.6 TDI CR EU6 115 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Audi A1 1.6 TDI CR EU6 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A1 1.6 TDI CR EU6 115 hp ECU
Audi A1 (2015 - 8X) 1.6 TDI CR EU6 115 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 115 to 145 hp (+30 hp, +26%) and torque from 250 to 310 Nm (+60 Nm). This engine ships with different ECU variants: Delphi DCM6.2V, Bosch EDC17C64, Bosch EDC17C74. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 5 configurations · 5 ECU variants. The 2015 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Audi is a premium manufacturer from Ingolstadt (Bavaria), founded in 1909 as Audiwerke August Horch & Cie. Audi's petrol range is badged TFSI, and the diesel range TDI. quattro is Audi's signature all-wheel-drive system, introduced in 1980. TDI is Audi's signature designation for direct-injection turbo diesels, in production since 1989. Audi S models with a diesel engine use an electrically driven compressor to eliminate turbo lag. The factory calibration of Audi diesels is conservative, leaving headroom for Stage 1.
The Audi community is renowned for its active tuning scene and a huge library of available Stage files. Within the VAG group, ECUs are standardised, so a single file often fits a dozen models across Audi/VW/Skoda/Seat. APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files.
The S tronic TCU requires calibration at Stage 1+, as the torque limiter usually sits below the engine's potential. Tiptronic is Audi's classic automatic for longitudinally mounted engines. S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range).
Frequently asked questions
How much horsepower does Stage 1 add for the Audi A1 1.6 TDI CR EU6 115 hp?
The Stage 1 gain for the Audi A1 1.6 TDI CR EU6 115 hp is 30 hp (+26%) over the stock 115 hp, for a total of 145 hp. Torque rises from 250 to 310 Nm (+60 Nm).
What is Stage 1 chip tuning for the Audi A1?
Stage 1 chip tuning of the Audi A1 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +30 hp with no hardware changes.
Can you do Stage 1 on the Audi A1 1.6 TDI CR EU6 115 hp?
Yes, Stage 1 for the Audi A1 1.6 TDI CR EU6 115 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Audi A1?
Stage 2 on the Audi A1 1.6 TDI CR EU6 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Audi A1 1.6 TDI CR EU6 115 hp?
The Audi A1 1.6 TDI CR EU6 115 hp was fitted with different ECUs depending on the year and trim: Delphi DCM6.2V, Bosch EDC17C64, Bosch EDC17C74. The write method (OBD, Bench, Boot) is determined when the unit is read.
How many TCU units does the Audi A1 1.6 TDI CR EU6 115 hp have?
The Audi A1 1.6 TDI CR EU6 115 hp comes with 2 different automatic-transmission TCU units: Temic DQ200 (MQB), Temic DQ200G2. Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.
What happens to the Audi A1 warranty after chip tuning?
The factory warranty of the Audi A1 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Audi A1 take?
On the Audi A1 1.6 TDI CR EU6 115 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Audi A1?
Yes, the original ECU firmware of the Audi A1 1.6 TDI CR EU6 115 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Audi A1?
Stage 1 for the Audi A1 1.6 TDI CR EU6 115 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.