Audi A1 1.4 TSI/TFSI S&S 125 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Audi A1 1.4 TSI/TFSI S&S 125 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A1 1.4 TSI/TFSI S&S 125 hp ECU
Audi A1 (2015 - 8X) 1.4 TSI/TFSI S&S 125 hp — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 125 to 155 hp (+30 hp, +24%) and torque from 200 to 250 Nm (+50 Nm). ECU — Bosch MED17.2.5. Flashing method: OBD or Bench depending on the unit's protection. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 3 configurations · 3 ECU variants. A petrol engine built in 2015 — a Tricore platform without strong protection; OBD access works.
Audi Sport is Audi's performance division, building the RS models. Audi shares platforms with Volkswagen, Porsche, Bentley and Lamborghini within VAG. Audi's signature slogan is “Vorsprung durch Technik” (Progress through Technology). The Audi community is one of the most open in Europe, with a large library of ready-made Stage files.
Within the VAG group, ECUs are standardised, so a single file often fits a dozen models across Audi/VW/Skoda/Seat. APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. On Audi, Stage 1 usually fits within the standard turnaround time. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life.
S tronic comes in dry and wet-clutch versions, each with a different torque rating. The S tronic TCU requires calibration at Stage 1+, as the torque limiter usually sits below the engine's potential. Tiptronic is Audi's classic automatic for longitudinally mounted engines.
Frequently asked questions
What is the Stage 1 effect on the Audi A1 1.4 TSI/TFSI S&S 125 hp?
Stage 1 for the Audi A1 1.4 TSI/TFSI S&S 125 hp adds +30 hp — power increases from 125 to 155 hp (+24%). Torque rises from 200 to 250 Nm (+50 Nm).
What does a Stage 1 remap of the Audi A1 1.4 TSI/TFSI S&S 125 hp include?
Stage 1 on the Audi A1 1.4 TSI/TFSI S&S 125 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.4 TSI/TFSI S&S 125 hp?
Stage 1 on the Audi A1 1.4 TSI/TFSI S&S 125 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Audi A1 1.4 TSI/TFSI S&S 125 hp?
Stage 2 for the Audi A1 1.4 TSI/TFSI S&S 125 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Audi A1 1.4 TSI/TFSI S&S 125 hp run?
The control unit of the Audi A1 1.4 TSI/TFSI S&S 125 hp is the Bosch MED17.2.5. Before flashing, the engineer identifies the exact revision and selects the write method.
Which TCUs are found on the Audi A1 1.4 TSI/TFSI S&S 125 hp?
The Audi A1 1.4 TSI/TFSI S&S 125 hp was fitted with different automatic-transmission units: Temic DQ200 (MQB), Temic DQ200G2. All are supported via Bench reading; the Stage 1 calibration is done for the specific TCU after the revision is identified.
Does Stage 1 void the warranty on the Audi A1?
Stage 1 on the Audi A1 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Audi A1 1.4 TSI/TFSI S&S 125 hp done?
The full remap cycle for the Audi A1 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Audi A1?
The original Audi A1 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Audi A1 1.4 TSI/TFSI S&S 125 hp?
The cost of Stage 1 for the Audi A1 1.4 TSI/TFSI S&S 125 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.