Aston Martin Vantage 4.0T (F1) 535 hp — Stage 1 file (+70 hp)
hp
Stage 1 file for Aston Martin Vantage 4.0T (F1) 535 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Aston Martin Vantage 4.0T (F1) 535 hp ECU
Aston Martin Vantage (2018) 4.0T (F1) 535 hp — luxury petrol engine of the passenger segment of the Aston Martin Lagonda group (Великобритания, 1913). Stage 1 chip tuning raises power from 535 to 605 hp (+70 hp, +13%) and torque from 685 to 810 Nm (+125 Nm). ECU — Bosch MED17.7.5. Flashing method: OBD or Bench depending on the unit's protection. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern petrol engine built in 2018 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
AMR (Aston Martin Racing) is the brand's performance division. Aston Martin is famously linked to James Bond, with the DB5 as the iconic film car. Aston Martin uses AMG-sourced V8s and its own V12 engines. Top-tier Aston Martin models have significant potential with hardware. Modern Aston Martin models usually require Bench. Aston Martin's petrol range comprises V8 BiTurbo engines (from Mercedes-AMG) and its own V12s.
With the right hardware, Aston Martin comfortably reaches Stage 2. The Aston Martin community is an ultra-premium chip tuning niche. Protection on modern Aston Martin models is tight, so Bench is required. Top-tier Aston Martin engines sit at the power ceiling of the British luxury segment.
Aston Martin uses the ZF 8HP on road cars and a DCT on its track models.
Frequently asked questions
What is the Stage 1 effect on the Aston Martin Vantage 4.0T (F1) 535 hp?
After Stage 1 the power of the Aston Martin Vantage 4.0T (F1) 535 hp rises from 535 to 605 hp, a gain of 70 hp (+13%). Torque rises from 685 to 810 Nm (+125 Nm).
How does Stage 1 differ from stock on the Aston Martin Vantage?
Stage 1 is a software optimization of the factory ECU firmware of the Aston Martin Vantage with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +70 hp with no hardware changes.
Does Stage 1 make sense on the Aston Martin Vantage 4.0T (F1) 535 hp with this much power?
Stage 1 for the Aston Martin Vantage 4.0T (F1) 535 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
What is Stage 2 for the Aston Martin Vantage 4.0T (F1) 535 hp?
Stage 2 on the Aston Martin Vantage 4.0T (F1) 535 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Aston Martin Vantage 4.0T (F1) 535 hp use?
The Aston Martin Vantage 4.0T (F1) 535 hp is fitted with the Bosch MED17.7.5 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
What does remapping the ZF 8HPxx gearbox give on the Aston Martin Vantage 4.0T (F1) 535 hp?
The ZF 8HPxx TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Aston Martin Vantage remain valid after Stage 1?
After remapping the Aston Martin Vantage, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Aston Martin Vantage?
Reading and writing via OBD takes 25-30 minutes on the Aston Martin Vantage. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Aston Martin Vantage?
Before Stage 1 the original of the Aston Martin Vantage 4.0T (F1) 535 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Aston Martin Vantage 4.0T (F1) 535 hp cost?
The remap price for the Aston Martin Vantage 4.0T (F1) 535 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.