Aston Martin Vantage 4.0 TFSI 580 hp — Stage 1 file (+80 hp)
hp
Stage 1 file for Aston Martin Vantage 4.0 TFSI 580 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Aston Martin Vantage 4.0 TFSI 580 hp ECU
Aston Martin Vantage (2018) 4.0 TFSI 580 hp — luxury petrol engine of the passenger segment of the Aston Martin Lagonda group (Великобритания, 1913). Stage 1 chip tuning raises power from 580 to 660 hp (+80 hp, +14%) and torque from 700 to 800 Nm (+100 Nm). The ZF ALx51 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. A 2018 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Aston Martin uses AMG-sourced V8s and its own V12 engines. Aston Martin is a British premium-luxury manufacturer, founded in 1913. Aston Martin Lagonda is the premium saloon sub-brand. Top-tier Aston Martin models have significant potential with hardware. Modern Aston Martin models usually require Bench. Aston Martin's petrol range comprises V8 BiTurbo engines (from Mercedes-AMG) and its own V12s.
With the right hardware, Aston Martin comfortably reaches Stage 2. The Aston Martin community is an ultra-premium chip tuning niche. Protection on modern Aston Martin models is tight, so Bench is required. Top-tier Aston Martin engines sit at the power ceiling of the British luxury segment.
Aston Martin uses the ZF 8HP on road cars and a DCT on its track models.
Frequently asked questions
How many horsepower does the Aston Martin Vantage 4.0 TFSI 580 hp reach after a remap?
Stage 1 chip tuning on the Aston Martin Vantage 4.0 TFSI 580 hp boosts engine output by 80 hp: from 580 to 660 hp. Torque rises from 700 to 800 Nm (+100 Nm).
What changes in the Aston Martin Vantage ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Aston Martin Vantage with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +80 hp with no hardware changes.
Does Stage 1 make sense on the Aston Martin Vantage 4.0 TFSI 580 hp with this much power?
On the top-spec Aston Martin Vantage 4.0 TFSI 580 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Aston Martin Vantage 4.0 TFSI 580 hp?
Stage 2 for the Aston Martin Vantage 4.0 TFSI 580 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What does remapping the ZF ALx51 gearbox give on the Aston Martin Vantage 4.0 TFSI 580 hp?
The ZF ALx51 TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Aston Martin Vantage remain valid after Stage 1?
After remapping the Aston Martin Vantage, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Aston Martin Vantage?
Reading and writing via OBD takes 25-30 minutes on the Aston Martin Vantage. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Aston Martin Vantage?
Before Stage 1 the original of the Aston Martin Vantage 4.0 TFSI 580 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Aston Martin Vantage 4.0 TFSI 580 hp cost?
The remap price for the Aston Martin Vantage 4.0 TFSI 580 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.