Aston Martin V8 Vantage 4.3i V8 426 hp — Stage 1 file (+24 hp)
hp
Stage 1 file for Aston Martin V8 Vantage 4.3i V8 426 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Aston Martin V8 Vantage 4.3i V8 426 hp ECU
Aston Martin V8 Vantage (2005) 4.3i V8 426 hp — luxury petrol engine of the passenger segment of the Aston Martin Lagonda group (Великобритания, 1913). Stage 1 chip tuning raises power from 426 to 450 hp (+24 hp, +6%) and torque from 470 to 490 Nm (+20 Nm). ECU — Ford EEC-VI. Flashing method: OBD or Bench depending on the unit's protection. A petrol engine built in 2005 — the era before widespread firmware encryption, OBD flash without complications.
AMR (Aston Martin Racing) is the brand's performance division. Aston Martin is famously linked to James Bond, with the DB5 as the iconic film car. Aston Martin uses AMG-sourced V8s and its own V12 engines. Top-tier Aston Martin models have significant potential with hardware. Aston Martin's petrol range comprises V8 BiTurbo engines (from Mercedes-AMG) and its own V12s.
With the right hardware, Aston Martin comfortably reaches Stage 2. The Aston Martin community is an ultra-premium chip tuning niche. Top-tier Aston Martin engines sit at the power ceiling of the British luxury segment.
Frequently asked questions
What is the Stage 1 effect on the Aston Martin V8 Vantage 4.3i V8 426 hp?
Stage 1 chip tuning on the Aston Martin V8 Vantage 4.3i V8 426 hp boosts engine output by 24 hp: from 426 to 450 hp. Torque rises from 470 to 490 Nm (+20 Nm).
What changes in the Aston Martin V8 Vantage ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Aston Martin V8 Vantage with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +24 hp with no hardware changes.
Does Stage 1 make sense on the Aston Martin V8 Vantage 4.3i V8 426 hp with this much power?
On the top-spec Aston Martin V8 Vantage 4.3i V8 426 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Aston Martin V8 Vantage 4.3i V8 426 hp?
Stage 2 for the Aston Martin V8 Vantage 4.3i V8 426 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Aston Martin V8 Vantage 4.3i V8 426 hp use?
The Aston Martin V8 Vantage 4.3i V8 426 hp is fitted with the Ford EEC-VI ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Aston Martin V8 Vantage remain valid after Stage 1?
After remapping the Aston Martin V8 Vantage, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Aston Martin V8 Vantage?
Reading and writing via OBD takes 25-30 minutes on the Aston Martin V8 Vantage. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Aston Martin V8 Vantage?
Before Stage 1 the original of the Aston Martin V8 Vantage 4.3i V8 426 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Aston Martin V8 Vantage 4.3i V8 426 hp cost?
The remap price for the Aston Martin V8 Vantage 4.3i V8 426 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.