Aston Martin DBS 6.0 V12 517 hp — Stage 1 file (+33 hp)
hp
Stage 1 file for Aston Martin DBS 6.0 V12 517 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Aston Martin DBS 6.0 V12 517 hp ECU
Aston Martin DBS (2008) 6.0 V12 517 hp — luxury petrol engine of the passenger segment of the Aston Martin Lagonda group (Великобритания, 1913). Stage 1 chip tuning raises power from 517 to 550 hp (+33 hp, +6%) and torque from 570 to 600 Nm (+30 Nm). ECU — Bosch ME17.8.31. Flashing method: OBD or Bench depending on the unit's protection. A petrol engine built in 2008 — the era before widespread firmware encryption, OBD flash without complications.
Aston Martin is famously linked to James Bond, with the DB5 as the iconic film car. Aston Martin uses AMG-sourced V8s and its own V12 engines. Aston Martin is a British premium-luxury manufacturer, founded in 1913. Top-tier Aston Martin models have significant potential with hardware. Aston Martin's petrol range comprises V8 BiTurbo engines (from Mercedes-AMG) and its own V12s.
With the right hardware, Aston Martin comfortably reaches Stage 2. The Aston Martin community is an ultra-premium chip tuning niche. Top-tier Aston Martin engines sit at the power ceiling of the British luxury segment.
Frequently asked questions
What power gain do you get after chip tuning the Aston Martin DBS 6.0 V12 517 hp?
Stage 1 for the Aston Martin DBS 6.0 V12 517 hp adds +33 hp — power increases from 517 to 550 hp (+6%). Torque rises from 570 to 600 Nm (+30 Nm).
What does a Stage 1 remap of the Aston Martin DBS 6.0 V12 517 hp include?
Stage 1 on the Aston Martin DBS 6.0 V12 517 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +33 hp with no hardware changes.
What does Stage 1 give on the top-spec Aston Martin DBS 6.0 V12 517 hp?
On the top-spec Aston Martin DBS 6.0 V12 517 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the Aston Martin DBS 6.0 V12 517 hp?
Stage 2 for the Aston Martin DBS 6.0 V12 517 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Aston Martin DBS 6.0 V12 517 hp run?
The control unit of the Aston Martin DBS 6.0 V12 517 hp is the Bosch ME17.8.31. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Aston Martin DBS?
Stage 1 on the Aston Martin DBS voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Aston Martin DBS 6.0 V12 517 hp done?
The full remap cycle for the Aston Martin DBS — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Aston Martin DBS?
The original Aston Martin DBS ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Aston Martin DBS 6.0 V12 517 hp?
The cost of Stage 1 for the Aston Martin DBS 6.0 V12 517 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.