Alpine A110 1.8 TCE 252 hp — Stage 1 file (+33 hp)
hp
Stage 1 file for Alpine A110 1.8 TCE 252 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Alpine A110 1.8 TCE 252 hp ECU
Alpine A110 (2017) 1.8 TCE 252 hp — sports petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance (через Renault) group (Франция, 1955). Stage 1 chip tuning raises power from 252 to 285 hp (+33 hp, +13%) and torque from 320 to 380 Nm (+60 Nm). This engine ships with different ECU variants: Getrag 7DCT300, Hitachi BED436, Hitachi BED501. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Alpine F1 Team is Renault's Formula 1 outfit. Alpine is a French sports-car brand, founded in 1955 and owned by Renault. The A110 is Alpine's iconic lightweight sports car. Alpine's petrol range uses high-output Renault turbo engines. On turbo-petrol Alpine engines, Stage 1 delivers a confident gain.
The Alpine community is a niche premium-sports scene in France. High-output Alpine models are firmly in the sports segment, with solid headroom for Stage 1.
Frequently asked questions
How many horsepower does the Alpine A110 1.8 TCE 252 hp reach after a remap?
After Stage 1 the power of the Alpine A110 1.8 TCE 252 hp rises from 252 to 285 hp, a gain of 33 hp (+13%). Torque rises from 320 to 380 Nm (+60 Nm).
How does Stage 1 differ from stock on the Alpine A110?
Stage 1 is a software optimization of the factory ECU firmware of the Alpine A110 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +33 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Alpine A110?
The high-output Alpine A110 1.8 TCE 252 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Alpine A110 1.8 TCE 252 hp?
Stage 2 on the Alpine A110 1.8 TCE 252 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Alpine A110 1.8 TCE 252 hp built with?
The Alpine A110 1.8 TCE 252 hp comes with 3 ECU variants: Getrag 7DCT300, Hitachi BED436, Hitachi BED501. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Alpine A110 remain valid after Stage 1?
After remapping the Alpine A110, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Alpine A110?
Reading and writing via OBD takes 25-30 minutes on the Alpine A110. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Alpine A110?
Before Stage 1 the original of the Alpine A110 1.8 TCE 252 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Alpine A110 1.8 TCE 252 hp cost?
The remap price for the Alpine A110 1.8 TCE 252 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.