Alpina XD4 3.0d 388 hp — Stage 1 file (+32 hp)
hp
Stage 1 file for Alpina XD4 3.0d 388 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Alpina XD4 3.0d 388 hp ECU
Alpina XD4 (2020) 3.0d 388 hp — sports diesel engine of the passenger segment of the Alpina Burkard Bovensiepen (BMW Group с 2022) group (Германия, 1916). Stage 1 chip tuning raises power from 388 to 420 hp (+32 hp, +8%) and torque from 770 to 830 Nm (+60 Nm). This engine ships with different ECU variants: Bosch MD1CP002, Bosch MD1CP032. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants. A modern diesel built in 2020 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
Alpina is a German BMW tuning brand, founded in 1965. Alpina is known for a balanced calibration that sits between stock BMW and M GmbH. Alpina specialises in premium tuned versions of BMW (B5, B7, XB7, B8). BMW diesels are known for high torque, and Stage 1 delivers an especially noticeable Nm gain.
The BMW community is renowned for active tuning and a large pool of available Stage files. Top BMW engines confidently reach Stage 2 with a downpipe + intake + intercooler. Protection on top BMW models is the toughest in the group and requires Bench. Bench reading is the standard procedure for top engines in modern models. Top BMW engines sit at the power ceiling, and the gain is significant. A well-known base once hardware is added (downpipe + intake + intercooler).
Mini and FWD compacts use a different TCU platform with its own tooling base. BMW's main gearbox is a modern multi-speed automatic. The TCU rarely needs recalibration up to Stage 1+, as the torque limiter usually copes with the Nm gain.
Frequently asked questions
How many horsepower does the Alpina XD4 3.0d 388 hp reach after a remap?
After Stage 1 the power of the Alpina XD4 3.0d 388 hp rises from 388 to 420 hp, a gain of 32 hp (+8%). Torque rises from 770 to 830 Nm (+60 Nm).
How does Stage 1 differ from stock on the Alpina XD4?
Stage 1 on the Alpina XD4 3.0d 388 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +32 hp with no hardware changes.
What does Stage 1 give on the top-spec Alpina XD4 3.0d 388 hp?
Stage 1 for the Alpina XD4 3.0d 388 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How does Stage 2 differ from Stage 1 on the Alpina XD4 3.0d 388 hp?
Stage 2 on the Alpina XD4 3.0d 388 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Alpina XD4 3.0d 388 hp have?
The Alpina XD4 3.0d 388 hp has 2 ECU variants: Bosch MD1CP002, Bosch MD1CP032. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does the ZF 8HPxx transmission need calibration after Stage 1 on the Alpina XD4?
Remapping the ZF 8HPxx gearbox is essential to fully unlock Stage 1 on the Alpina XD4 3.0d 388 hp. Without a TCU update the factory torque cap will choke the torque gain and shifts will become noticeably softer.
Does Stage 1 void the warranty on the Alpina XD4?
Stage 1 on the Alpina XD4 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Alpina XD4 3.0d 388 hp done?
The full remap cycle for the Alpina XD4 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Alpina XD4?
The original Alpina XD4 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Alpina XD4 3.0d 388 hp?
The cost of Stage 1 for the Alpina XD4 3.0d 388 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.