Alpina D3 S 40d 355 hp — Stage 1 file (+45 hp)
hp
Stage 1 file for Alpina D3 S 40d 355 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Alpina D3 S 40d 355 hp ECU
Alpina D3 S (2020) 40d 355 hp — sports diesel engine of the passenger segment of the Alpina Burkard Bovensiepen (BMW Group с 2022) group (Германия, 1916). Stage 1 chip tuning raises power from 355 to 400 hp (+45 hp, +13%) and torque from 730 to 800 Nm (+70 Nm). ECU — Bosch MD1CP002. Flashing method: OBD or Bench depending on the unit's protection. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern diesel built in 2020 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
Alpina is a German BMW tuning brand, founded in 1965. Alpina is known for a balanced calibration that sits between stock BMW and M GmbH. Alpina specialises in premium tuned versions of BMW (B5, B7, XB7, B8). BMW diesels are known for high torque, and Stage 1 delivers an especially noticeable Nm gain.
The BMW community is renowned for active tuning and a large pool of available Stage files. Top BMW engines confidently reach Stage 2 with a downpipe + intake + intercooler. Protection on top BMW models is the toughest in the group and requires Bench. Top BMW engines sit at the power ceiling, and the gain is significant. A well-known base once hardware is added (downpipe + intake + intercooler). Bench reading is the standard procedure for top engines in modern models.
The TCU rarely needs recalibration up to Stage 1+, as the torque limiter usually copes with the Nm gain. Top BMW models use a reinforced gearbox version that handles significant stock torque. The gearbox comes in versions by torque class, so its tolerance depends on the engine.
Frequently asked questions
How much does the power of the Alpina D3 S 40d 355 hp increase after Stage 1?
After Stage 1 the power of the Alpina D3 S 40d 355 hp rises from 355 to 400 hp, a gain of 45 hp (+13%). Torque rises from 730 to 800 Nm (+70 Nm).
How does Stage 1 differ from stock on the Alpina D3 S?
Stage 1 is a software optimization of the factory ECU firmware of the Alpina D3 S with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +45 hp with no hardware changes.
Does Stage 1 make sense on the Alpina D3 S 40d 355 hp with this much power?
Stage 1 for the Alpina D3 S 40d 355 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
What is Stage 2 for the Alpina D3 S 40d 355 hp?
Stage 2 on the Alpina D3 S 40d 355 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Alpina D3 S 40d 355 hp use?
The Alpina D3 S 40d 355 hp is fitted with the Bosch MD1CP002 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
What does remapping the ZF 8HPxx gearbox give on the Alpina D3 S 40d 355 hp?
The ZF 8HPxx TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Alpina D3 S remain valid after Stage 1?
After remapping the Alpina D3 S, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Alpina D3 S?
Reading and writing via OBD takes 25-30 minutes on the Alpina D3 S. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Alpina D3 S?
Before Stage 1 the original of the Alpina D3 S 40d 355 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Alpina D3 S 40d 355 hp cost?
The remap price for the Alpina D3 S 40d 355 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.