Alpina B6 S 4.4 V8 bi-turbo 507 hp — Stage 1 file (+93 hp)
hp
Stage 1 file for Alpina B6 S 4.4 V8 bi-turbo 507 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Alpina B6 S 4.4 V8 bi-turbo 507 hp ECU
Alpina B6 S (2009) 4.4 V8 bi-turbo 507 hp — sports petrol engine of the passenger segment of the Alpina Burkard Bovensiepen (BMW Group с 2022) group (Германия, 1916). Stage 1 chip tuning raises power from 507 to 600 hp (+93 hp, +18%) and torque from 700 to 800 Nm (+100 Nm). ECU — Siemens/Continental MSD85. Flashing method: OBD or Bench depending on the unit's protection. The 2009 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Alpina specialises in premium tuned versions of BMW (B5, B7, XB7, B8). Since 2022 Alpina has been part of the BMW Group. Alpina is a German BMW tuning brand, founded in 1965. The BMW petrol range spans the mainstream segment and the sporting M-series.
Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. Top BMW engines confidently reach Stage 2 with a downpipe + intake + intercooler. The BMW community is renowned for active tuning and a large pool of available Stage files. Bench reading is the standard procedure for top engines in modern models. Top BMW engines sit at the power ceiling, and the gain is significant. A well-known base once hardware is added (downpipe + intake + intercooler).
Frequently asked questions
How many horsepower does the Alpina B6 S 4.4 V8 bi-turbo 507 hp reach after a remap?
The Stage 1 gain for the Alpina B6 S 4.4 V8 bi-turbo 507 hp is 93 hp (+18%) over the stock 507 hp, for a total of 600 hp. Torque rises from 700 to 800 Nm (+100 Nm).
What is Stage 1 chip tuning for the Alpina B6 S?
Stage 1 on the Alpina B6 S 4.4 V8 bi-turbo 507 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +93 hp with no hardware changes.
What does Stage 1 give on the top-spec Alpina B6 S 4.4 V8 bi-turbo 507 hp?
Stage 1 for the Alpina B6 S 4.4 V8 bi-turbo 507 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How does Stage 2 differ from Stage 1 on the Alpina B6 S 4.4 V8 bi-turbo 507 hp?
Stage 2 on the Alpina B6 S 4.4 V8 bi-turbo 507 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Alpina B6 S 4.4 V8 bi-turbo 507 hp run?
The control unit of the Alpina B6 S 4.4 V8 bi-turbo 507 hp is the Siemens/Continental MSD85. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Alpina B6 S?
Stage 1 on the Alpina B6 S voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Alpina B6 S 4.4 V8 bi-turbo 507 hp done?
The full remap cycle for the Alpina B6 S — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Alpina B6 S?
The original Alpina B6 S ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Alpina B6 S 4.4 V8 bi-turbo 507 hp?
The cost of Stage 1 for the Alpina B6 S 4.4 V8 bi-turbo 507 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.