Alpina B3 S — Stage 1 / Stage 2 parameters
hp
Stage 1 file for Alpina B3 S
Target +0 hp. Custom development for your engine.
Все двигатели Alpina B3 S в базе
| Engine | Version | ECU | Stock | Stage 1 | Gain |
|---|---|---|---|---|---|
| 35i (N54) 400 hp | 2008 | Siemens/Continental MSD80, Siemens/Continental MSD81, ZF 6HP EGS | 400 hp | 450 hp | +50 |
| 3.0TT 440 hp | 2016 | Bosch MEVD17.2.6, Bosch MEVD17.2.G, ZF 8HPxx | 440 hp | 480 hp | +40 |
Alpina B3 S in the CHIPOK database: 2 engines (all petrol) — 400–440 hp stock → up to 480 Stage 1. Model years 2008–2016. Every entry is a real calibration from our engineers' work, not a theoretical estimate.
Calibration for Alpina B3 S is done in licensed WinOLS5 for the specific control unit — with checksum recalculation and verification against the OBD log.
Pick an engine in the table — you'll see the stock values, Stage 1 target and ECU type. Available options: DTC off, Lambda off, Catalyst off (for downpipe), Pop&Bang (for turbo), Speed limiter off, Hot start fix. Ordering a Stage file: 1 cr = 1 €, no subscriptions, engineer support on Telegram, free revisions based on the OBD log.
Alpina B3 S engines in our database: 3.0 BiTurbo I6 уровень повышенного давления турбин 410-440 hp (B3 S F30/F31 limited). Specific ECU units: Bosch MEVD17.2.6, MEVD17.2.G, Siemens MSD80, MSD81, ZF 6HP EGS / 8HPxx TCU. Model-specific notes: special limited series with increased turbo pressure and custom maps; typically 410 hp on F30; rare for tuning - ALPINA owners usually keep stock factory tune due to warranty and turbo headroom.