Alfa Romeo Stelvio 2.0 TB 200 hp — Stage 1 file (+80 hp)
hp
Stage 1 file for Alfa Romeo Stelvio 2.0 TB 200 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Alfa Romeo Stelvio 2.0 TB 200 hp ECU
Alfa Romeo Stelvio (2017) 2.0 TB 200 hp — premium petrol engine of the passenger segment of the Stellantis group (Италия, 1910). Stage 1 chip tuning raises power from 200 to 280 hp (+80 hp, +40%) and torque from 330 to 460 Nm (+130 Nm). ECU — Marelli 10JA. Flashing method: OBD or Bench depending on the unit's protection. The ZF 8HP50 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. A petrol engine built in 2017 — a Tricore platform without strong protection; OBD access works.
Quadrifoglio is Alfa Romeo's performance sub-brand, the sporty variant for its top engines. The Alfa Romeo badge, featuring the Cross of Milan and the Visconti serpent, is the brand's historic emblem. The Alfa Romeo range comprises the Giulia, Stelvio, Tonale and Junior. Quadrifoglio is Alfa's top segment, with sporty V6 engines. The factory Alfa calibration is sporty-premium; headroom for Stage 1 remains. Alfa Romeo's petrol range comprises premium turbo engines and the Quadrifoglio.
On Alfa performance petrol engines, Stage 1 delivers a noticeable gain. The Alfa Romeo community is a premium chip tuning niche in Italy and across Europe. High-output Alfa models sit in the Quadrifoglio segment, with genuine Stage 2 potential.
The ZF 8HP TCU rarely needs calibration below Stage 1+. Alfa Romeo uses the ZF 8HP, a premium eight-speed automatic.
Frequently asked questions
What power gain do you get after chip tuning the Alfa Romeo Stelvio 2.0 TB 200 hp?
Stage 1 chip tuning on the Alfa Romeo Stelvio 2.0 TB 200 hp boosts engine output by 80 hp: from 200 to 280 hp. Torque rises from 330 to 460 Nm (+130 Nm).
What changes in the Alfa Romeo Stelvio ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Alfa Romeo Stelvio with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +80 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Alfa Romeo Stelvio?
Stage 1 on the powerful Alfa Romeo Stelvio 2.0 TB 200 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Alfa Romeo Stelvio 2.0 TB 200 hp?
Stage 2 for the Alfa Romeo Stelvio 2.0 TB 200 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Alfa Romeo Stelvio 2.0 TB 200 hp use?
The Alfa Romeo Stelvio 2.0 TB 200 hp is fitted with the Marelli 10JA ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
What does remapping the ZF 8HP50 gearbox give on the Alfa Romeo Stelvio 2.0 TB 200 hp?
The ZF 8HP50 TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Alfa Romeo Stelvio remain valid after Stage 1?
After remapping the Alfa Romeo Stelvio, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Alfa Romeo Stelvio?
Reading and writing via OBD takes 25-30 minutes on the Alfa Romeo Stelvio. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Alfa Romeo Stelvio?
Before Stage 1 the original of the Alfa Romeo Stelvio 2.0 TB 200 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Alfa Romeo Stelvio 2.0 TB 200 hp cost?
The remap price for the Alfa Romeo Stelvio 2.0 TB 200 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.