Alfa Romeo MiTo 1.6 JTDm 115 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Alfa Romeo MiTo 1.6 JTDm 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Alfa Romeo MiTo 1.6 JTDm 115 hp ECU
Alfa Romeo MiTo (2008) 1.6 JTDm 115 hp — premium diesel engine of the passenger segment of the Stellantis group (Италия, 1910). Stage 1 chip tuning raises power from 115 to 140 hp (+25 hp, +22%) and torque from 320 to 389 Nm (+69 Nm). This engine ships with different ECU variants: Bosch EDC16C8, Bosch EDC17C49, Bosch EDC17C69. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2008 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Alfa Romeo specialises in premium saloons and sports cars with a strong focus on driver engagement. Quadrifoglio is Alfa Romeo's performance sub-brand, the sporty variant for its top engines. The Alfa Romeo badge, featuring the Cross of Milan and the Visconti serpent, is the brand's historic emblem. The factory calibration of Alfa diesels is conservative, leaving headroom for Stage 1. DPF/SCR with AdBlue is standard on all Euro-6 Alfa diesels. The Alfa Romeo diesel range is largely based on Stellantis MultiJet technology.
The Alfa Romeo community is a premium chip tuning niche in Italy and across Europe. On mid-range Alfa diesels, Stage 1 delivers a noticeable torque gain. Mid-range Alfa Romeos sit in the premium segment with solid headroom for Stage 1.
Frequently asked questions
How much does the power of the Alfa Romeo MiTo 1.6 JTDm 115 hp increase after Stage 1?
The Stage 1 gain for the Alfa Romeo MiTo 1.6 JTDm 115 hp is 25 hp (+22%) over the stock 115 hp, for a total of 140 hp. Torque rises from 320 to 389 Nm (+69 Nm).
What is Stage 1 chip tuning for the Alfa Romeo MiTo?
Stage 1 on the Alfa Romeo MiTo 1.6 JTDm 115 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 JTDm 115 hp?
Stage 1 on the Alfa Romeo MiTo 1.6 JTDm 115 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Alfa Romeo MiTo 1.6 JTDm 115 hp?
Stage 2 on the Alfa Romeo MiTo 1.6 JTDm 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Alfa Romeo MiTo 1.6 JTDm 115 hp have?
The Alfa Romeo MiTo 1.6 JTDm 115 hp has 3 ECU variants: Bosch EDC16C8, Bosch EDC17C49, Bosch EDC17C69. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Alfa Romeo MiTo?
Stage 1 on the Alfa Romeo MiTo voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Alfa Romeo MiTo 1.6 JTDm 115 hp done?
The full remap cycle for the Alfa Romeo MiTo — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Alfa Romeo MiTo?
The original Alfa Romeo MiTo ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Alfa Romeo MiTo 1.6 JTDm 115 hp?
The cost of Stage 1 for the Alfa Romeo MiTo 1.6 JTDm 115 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.