Alfa Romeo MiTo 1.4 Multi-Air 170 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Alfa Romeo MiTo 1.4 Multi-Air 170 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Alfa Romeo MiTo 1.4 Multi-Air 170 hp ECU
Alfa Romeo MiTo (2008) 1.4 Multi-Air 170 hp — premium petrol engine of the passenger segment of the Stellantis group (Италия, 1910). Stage 1 chip tuning raises power from 170 to 195 hp (+25 hp, +15%) and torque from 250 to 300 Nm (+50 Nm). This engine ships with different ECU variants: Marelli 8GMF, Marelli 8GMK, Marelli 8GMK.Fx, Marelli 8TDW. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 9HP48-948TE TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 5 configurations · 5 ECU variants. A petrol engine built in 2008 — the era before widespread firmware encryption, OBD flash without complications.
The Alfa Romeo range comprises the Giulia, Stelvio, Tonale and Junior. Alfa Romeo is an Italian premium manufacturer from Milan, founded in 1910. Alfa Romeo is part of the Stellantis group (formerly FCA). Alfa shares some engines and platforms with Maserati within Stellantis. On mid-range Alfa turbo petrol engines, Stage 1 delivers a noticeable gain. Quadrifoglio is Alfa's top segment, with sporty V6 engines.
The Alfa Romeo community is a premium chip tuning niche in Italy and across Europe. Mid-range Alfa Romeos sit in the premium segment with solid headroom for Stage 1.
The ZF 8HP TCU rarely needs calibration below Stage 1+. Alfa Romeo uses the ZF 8HP, a premium eight-speed automatic.
Frequently asked questions
How much does the power of the Alfa Romeo MiTo 1.4 Multi-Air 170 hp increase after Stage 1?
Stage 1 for the Alfa Romeo MiTo 1.4 Multi-Air 170 hp adds +25 hp — power increases from 170 to 195 hp (+15%). Torque rises from 250 to 300 Nm (+50 Nm).
What does a Stage 1 remap of the Alfa Romeo MiTo 1.4 Multi-Air 170 hp include?
Stage 1 on the Alfa Romeo MiTo 1.4 Multi-Air 170 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.4 Multi-Air 170 hp?
Stage 1 on the Alfa Romeo MiTo 1.4 Multi-Air 170 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Alfa Romeo MiTo 1.4 Multi-Air 170 hp?
Stage 2 for the Alfa Romeo MiTo 1.4 Multi-Air 170 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Alfa Romeo MiTo 1.4 Multi-Air 170 hp have?
The Alfa Romeo MiTo 1.4 Multi-Air 170 hp has 4 ECU variants: Marelli 8GMF, Marelli 8GMK, Marelli 8GMK.Fx, Marelli 8TDW. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does the ZF 9HP48-948TE transmission need calibration after Stage 1 on the Alfa Romeo MiTo?
Remapping the ZF 9HP48-948TE gearbox is essential to fully unlock Stage 1 on the Alfa Romeo MiTo 1.4 Multi-Air 170 hp. Without a TCU update the factory torque cap will choke the torque gain and shifts will become noticeably softer.
Does Stage 1 void the warranty on the Alfa Romeo MiTo?
Stage 1 on the Alfa Romeo MiTo voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Alfa Romeo MiTo 1.4 Multi-Air 170 hp done?
The full remap cycle for the Alfa Romeo MiTo — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Alfa Romeo MiTo?
The original Alfa Romeo MiTo ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Alfa Romeo MiTo 1.4 Multi-Air 170 hp?
The cost of Stage 1 for the Alfa Romeo MiTo 1.4 Multi-Air 170 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.