Alfa Romeo MiTo 1.4 Multi-Air 165 hp — Stage 1 file (+25 hp)

Stage 1 for the Alfa Romeo MiTo 1.4 Multi-Air 165 hp adds +25 hp — power increases from 165 to 190 hp (+15%). Torque rises from 250 to 300 Nm (+50 Nm).

Stage 1 is a software optimization of the factory ECU firmware of the Alfa Romeo MiTo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.

A remap of the Alfa Romeo MiTo 1.4 Multi-Air 165 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.

Stage 2 for the Alfa Romeo MiTo 1.4 Multi-Air 165 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.

After remapping the Alfa Romeo MiTo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.

Reading and writing via OBD takes 25-30 minutes on the Alfa Romeo MiTo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.

Before Stage 1 the original of the Alfa Romeo MiTo 1.4 Multi-Air 165 hp is read out and saved — returning to the factory state is possible at any time.

The remap price for the Alfa Romeo MiTo 1.4 Multi-Air 165 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.