Abarth Punto 1.4 T-Jet 155 hp — Stage 1 file (+22 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Abarth Punto 1.4 T-Jet 155 hp ECU

Abarth Punto (2010) 1.4 T-Jet 155 hp — sports petrol engine of the passenger segment of the Stellantis (тюнинг-суббренд Fiat) group (Италия, 1899). Stage 1 chip tuning raises power from 155 to 177 hp (+22 hp, +14%) and torque from 230 to 280 Nm (+50 Nm). ECU — Bosch ME7.9.10. Flashing method: OBD or Bench depending on the unit's protection. A petrol engine built in 2010 — a Tricore platform without strong protection; OBD access works.

Abarth has historically shared its platforms and base engines with Fiat. Abarth is an Italian tuning brand, founded in 1949 by Carlo Abarth. Abarth has been part of Fiat (now Stellantis) since 1971. The factory Abarth calibration is sporty, yet there is still headroom for Stage 1. Abarth builds high-output turbo-petrol engines based on Fiat units.

The Abarth community is a performance niche within the wider Fiat scene. The Fiat community in Southern Europe has a large pool of ready-made Stage files. Mid-range Fiat engines are a high-volume chip tuning subject.

Frequently asked questions

How much does the power of the Abarth Punto 1.4 T-Jet 155 hp increase after Stage 1?

Stage 1 for the Abarth Punto 1.4 T-Jet 155 hp adds +22 hp — power increases from 155 to 177 hp (+14%). Torque rises from 230 to 280 Nm (+50 Nm).

What does a Stage 1 remap of the Abarth Punto 1.4 T-Jet 155 hp include?

Stage 1 on the Abarth Punto 1.4 T-Jet 155 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +22 hp with no hardware changes.

Is a Stage 1 remap safe for the 1.4 T-Jet 155 hp?

Stage 1 on the Abarth Punto 1.4 T-Jet 155 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.

How does Stage 2 differ from Stage 1 on the Abarth Punto 1.4 T-Jet 155 hp?

Stage 2 for the Abarth Punto 1.4 T-Jet 155 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.

What control unit does the Abarth Punto 1.4 T-Jet 155 hp run?

The control unit of the Abarth Punto 1.4 T-Jet 155 hp is the Bosch ME7.9.10. Before flashing, the engineer identifies the exact revision and selects the write method.

Does Stage 1 void the warranty on the Abarth Punto?

Stage 1 on the Abarth Punto voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Abarth Punto 1.4 T-Jet 155 hp done?

The full remap cycle for the Abarth Punto — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Abarth Punto?

The original Abarth Punto ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Abarth Punto 1.4 T-Jet 155 hp?

The cost of Stage 1 for the Abarth Punto 1.4 T-Jet 155 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno